Start with what the equipment has to do. Every application below maps to the product families that do it — and anything that does not fit is what our engineering side is for.
Effluent pumping, dosing and treatment control for homes and small commercial systems — from a single demand pump to an aerobic unit with UV supervision.
Stations that cannot go down: alternation every cycle, a second pump that comes in on its own, and an alarm on its own branch. Single-phase or three-phase.
Treated effluent put back into the ground on the schedule the field was designed for — timed doses, zone control, flushing and UV supervision.
Moving water where it is needed — cisterns, ponds, wells and irrigation — including three-phase pumps on farms with single-phase service.
Three-phase motor control on 208 to 600 V plant service, with adjustable overloads set to the nameplate and protection coordinated on one curve.
A control panel inside your product, under your name — engineered to your sequence, serialized, and documented at the door.
Whatever the family, the same rules go into the box. That is what makes a panel built in Mims recognizable — to the inspector, to the service tech, and to us, years after it ships.
Every panel built and marked under the Listing, with a nameplate stating its own ratings.
Each unit carries its own serial and a build record. We know what is inside every panel we ship.
A code inside the door opens that panel’s current documents on any phone. No login, no searching.
The control assembly lifts out on quick-connects. Field terminations stay put while service happens on the bench.
Overloads, branch breakers and control fuses plotted together, so each device clears in its own zone.
Breakers, floats, clamps and weights we manufacture ourselves — so our lead times hold.
Tell us what the equipment has to do. We will engineer the control scheme, build it to UL 508A, and put your brand on the front if you want it there.