Control panel documentation

Aerobic Treatment Control Panel

CP-001-3-0003

Demand dose · UV disinfection · failsafe lockout. 120 VAC single phase. UL 508A Listed, file E547664.

Read first — two power feeds

This panel is fed by TWO separate 120 V circuits: main power and a dedicated control circuit that keeps the alarm live when the main breaker is off. Disconnect BOTH feeds and verify with a voltage tester before opening the panel.

Documents

Operation Manual Installation, wiring, operation, PRI-51 programming, troubleshooting, warranty · PDF Specification Sheet Ratings, protection matrix, supervision systems · PDF

At a glance

Model: CP-001-3-0003
Supply: 120 VAC, 60 Hz, single phase — main power plus a dedicated control circuit
Compressor: 120 V, ½ HP max (10 FLA)
Demand pump: 120 V, 1 HP max (15 FLA)
Protection: Failsafe demand-pump lockout on air loss or UV fault. High water raises the alarm only, so the pump keeps lowering the level.
Enclosure: Polycase ZH-100804 · NEMA 4X polycarbonate · 10.0 × 8.4 × 5.2 in, −20 °C to 50 °C
Compliance: UL 508A Listed · NSF/ANSI 40

Support & warranty

This panel is manufactured for AKHA Manufacturing, LLC. All technical support, warranty claims and service questions are administered by them.

Toll free 800-370-3749 · Phone (574) 936-2542

2055 Pidco Dr. / P.O. Box 640, Plymouth, Indiana 46563